Top 4 Web based CCTV Lens Calculators

Choosing the right angle of view or field of view (FOV) is about 70% of the skill in getting great results from your CCTV design. Fortunately there are plenty of tools to help us work this out.

A Google search for “CCTV Lens Calculator” returns 60,800 results so how are you going to choose which one to work with? I have tried several and for the majority, they are basically the same thing. Lets face it, it’s just maths (trigonometry to be exact). Unfortunately the ones on the front page are mainly there due to good marketing rather than their usefulness.
Following are my personal recommendations.

Manual CCTV lens calculators

CCTV-LENS-CALCULATORsThe traditional method to remove the guess work of selecting the right CCTV lens was a cardboard circle that had 3 moving parts as shown here.When sitting at my desk, this is still the first tool I go for when I need to calculate FOV as it is quicker than loading a suitable website or iPhone app. You simply dial up the distance from the camera to the object in the bottom window followed by the required scene width or height in on the front clear plastic part. Lastly you read the lens size base on the CCD format from the green section under the clear part.
This still appears to be the most popular tool amongst the professionals.

The same can be performed with a spread sheet using these formula’s

 The formula used to calculate the lens size is:

CCTV lens calculation formula

 CCD Format

CCTV 1/4 CCD formatCCTV 1/3 CCD formatCCTV 1/2 CCD format

On line CCTV lens calculators

There are a number of good on line lens calculators but while they do the same result as the lens wheel above, they still do not factor in the camera’s installation height or tilt, which are needed for a more accurate calculation. This is where a 3D drawing software is the preferred option. Additionally most on line lens calculators do not include the now very common 16:9 aspect ratio.

 

Theia Technologies Lens CalculatorTheia Technology CCTV lens calculator

      • 4:3 and 16:9 aspect ratio’s
      • Dynamic image of the scene
      • Camera resolution
      • Object size
      • Focal length
      • Angle of view
      • Pixel density
      • Digital zoom
      • Pre defined lenses
      • Also available as an iPhone app & Android app

 

 

 

Polaris USA Lens Calculator

      • imageDynamic image of the scene
      • Object size
      • Focal length
      • Angle of view
      • Pre defined lenses

Negatives

      • 4:3 aspect only

 

 

Fujinon CCTV Lens CalculatorFujinon CCTV lens calculator

        • 4:3 and 16:9 aspect ratio’s
        • Object size
        • Focal length
        • Angle of view

 

 

Aventura Lens Calculatorimage

      • Dynamic image of the scene
      • Object size
      • Focal length
      • Angle of view
      • Pre defined lenses

Negatives

      • 4:3 1/3” format only

 

If you know of other quality CCTV lens calculators that deserve a mention, please post a comment below.

Tags: , ,

16 Comments

Leave a comment
  1. Norman December 15, 2011 at 5:15 pm #

    Also a nice solution is the Dallmeier ViewDesigner.

    http://www.dallmeier-electronic.com/index.php?id=1936&L=1

    Allthough I still prefer to use the cardboard lens calculator.

    When starting up the computer I prefer to use my CCTV design software.

    • Tim Norton December 15, 2011 at 6:52 pm #

      Thanks Norman.
      I will look at that one. Which CCTV design software do you use. CCTV Cad, JVSG IP video design tool or some thing other?

  2. Max from JVSG December 15, 2011 at 8:50 pm #

    Recently we updated our free online lens calculator.

    http://www.jvsg.com/online/

    -Aspect ratios: 4:9, 16:9, 3:2
    -Object Size
    -Focal Length
    -Angle of View
    -Resolution / Pixel density

    • Tim Norton December 15, 2011 at 8:59 pm #

      Thanks Max,

      I did not know you had this one on your site.
      As you know I use and love the IP Video System Design Tool that you created. Looking forward to the new version I hear is coming out soon.

      Would you like to drop a few hints here about it’s new features or is that still in the cone of silence?

      • Max from JVSG December 22, 2011 at 4:23 pm #

        We sent a preliminary test version for translation and localization.
        Publc Beta version is going to be published a little bit later.

  3. Norman December 16, 2011 at 2:43 am #

    Off coarse I use the IP video design tool of JVSG. The best design tool in my opinion.

  4. Lamie Saif December 21, 2011 at 2:17 am #

    Thank you Tim for your invitation.
    To be able to use the table the user should have an account, then I will check on daily base to check the new accounts and giving free access for 3 free months with no obligations what so ever, only if the user wants to continue using then should pay for that and the user will get an extra local use html file.
    The good in this table this what I think
    1- 10 input parameters.
    2- everything is on one page so it will be more easy to match, compare and analyse.
    3- can be reached from any device that have contact with internet like Iphone, Ipad or notebook
    Best regards Tim and thank you again
    Hope you have time to try it too.

  5. Lamie Saif December 21, 2011 at 9:06 pm #

    Hi Tim
    I can add some CCTV calculators so you can evaluate them.
    From Pelco
    http://www.pelco.com/sites/global/en/sales-and-support/downloads-and-tools/tools/lens-calc.page
    and CCTV app. tool download site
    http://www.pelco.com/sites/global/en/sales-and-support/downloads-and-tools/tools/pelco-camera-tool.page

    From Bosch
    http://www.boschsecurity.us/en-us/ProductInformation/OnlineTool/ -> Field of View Calculator
    Bosch did have app. tool very similar to Dallmeier but they have removed it.

    This one is used as a ref. in UK from (The CCTV Advisory Service )
    http://www.cctv-information.co.uk/lenscalc/

    From IQEYE
    need to have an account
    http://www.iqeye.com/resources/iqdesign-tools.html
    regards

    • Tim Norton January 2, 2012 at 4:33 pm #

      Lamie you ended up in the bucket of SPAM for some reason.

      Thanks for the comments and I will take a look at these

      • Lamie Saif January 3, 2012 at 1:42 am #

        Hi Tim
        I think the reason for why my mail become spam is because there are many sites addresses.
        Anyway from the beginning of this year I did some changes in my site that make any one can use my calculation table in full but for 1/4 “ sensor only,by clicking on example table in the english page to use or test the table.
        English page in my site
        http://www.lssurveillance.com/CCTV-Calculator.html
        So you can compare my table with other calculators.
        You will see that my CCTV calculator shows the following
        The true FOV in two levels
        DOF
        Recognition and identification distances related to pixels form and to monitor height.
        Conclusions related to identification.
        I think no other calculator on internet shows all of these in one page.

  6. Zac January 11, 2012 at 8:06 pm #

    Lots of great solutions, fantastic post
    I use Dallmeier ViewDesigner then overlay the footprint on the site using CAD it works well with transparency also makes it easer for clients to understand what areas will be covered.

    http://i.imgur.com/AzpTH.png

    • Tim Norton January 11, 2012 at 9:16 pm #

      Hi Zac and thanks for sharing

      I have not heard of that one before. Do you have a link to it and is it a free tool?

    • Tim Norton January 25, 2012 at 7:06 pm #

      Thanks for sharing but I would like to see the calculators at least do 4:3 and 16:9 aspect to be of use in todays CCTV market

  7. Tim Norton March 30, 2012 at 6:25 pm #

    My friend in CCTV – Max – has made the following post on Linkedin

    Max V. Shumeyko • In January we have updated our Flash based online lens calculator.
    http://www.jvsg.com/online/

    In addition to typical lens calculator functions, our calculator allows to calculate pixel density and face width in pixels as well as to get bandwidth and storage estimation for Motion JPEG, JPEG2000, MPEG4 and H.264.

    Our calculator supports cameras with aspect ratio 4:3, 16:9, 3:2, and even 16:10.

    This online calculator is free to use.

  8. Online Storage April 14, 2012 at 6:10 pm #

    Hi, I am Julie George,. Thank you for giving us tips.. It helps me alot :) Keep on posting!

    If you have time you can also visit this site for more information about Online Storage and online backup and storage

Leave a Reply to Lamie Saif